Polyester Biaxial Geogrid Price For Road Basement Reinforcement
Biaxial geogrids have been utilized in pavement construction and soil stabilization projects throughout the worldwide. Biaxial Geogrid is Strata's innovative geogrid that is made from extruded polypropylene which provides superior stiffness, aperture stability and interlock capabilities for structural reinforcement of paved and unpaved roads.
POLYESTER GEOGRID
Polyester geogrid is a new kind of earthwork base material;which is used to strengthen the road surface and roadbed. Composing of high-strength polyester yarns,coated with an inorganic sizing agent.Features
1.High tensile strength low elongation
2.High tear - resistant
3.Strong combination with gravel and soil
4.Anticorrosive,anti-aging and alkali-resistant
Application
It mainly applied in strengthening soft ground of rail and road.
Warp knitted polyester geogrid is used in highway, railway, municipal road and other road soft roadbed reinforcement, can effectively improve the roadbed strength and delay the reflection cracks of the road.
The reinforcement and isolation of dam and river in hydraulic engineering of warp knitted polyester geogrid, reinforce the soft soil foundation, strengthen its protection ability, and improve the bearing capacity and stability of the foundation.
Warp knitted polyester geogrid reinforced embankment slope, retaining wall reinforcement, enhance the overall strength, highway, railway, water conservancy and other soft soil foundation reinforcement.
Warp knitted polyester geogrid for railway ballast protection: because the train vibration and wind and rain, causing loss of ballast, with geogrid encased ballast, ballast to prevent the loss, improve the stability of the roadbed.
Company Profile
Construction Method
1. The slope shall be laid in order from top to bottom. Don't pull it too tight.
2. Tow adjacent longitudinal joints should not be in a horizontal line, should bestaggered more than 1m each other.
3. Longitudinal joints should be more than 1.50m away from the dam foot and bending foot, and should be located on the plane.
4. When the slope is laid, the direction of spreading film should be basically parallel to the slope line.
5. The construction, first of all to use small diameter sand or clay levelingbase, and then laid the geomembrane. The geomembrane should not be stretched too tight, and the part of the soil bured at both ends is corrugated. A transitional layer of about 10cm is laid on the geomembrane with sand or clay.
Shandong Geomembrane New Materials Co., Ltd. It stands out as an exceptional factory in the field of geosynthetic materials.We specialize in the entire industrial chain operation of new geosynthetic materials such as geomembranes, composite geomembranes, geotextiles, geocells, threedimensional composite drainage nets, bentonite waterproof blankets, integrating production, R&D, and sales. Equipped with advanced production equipment and a professional technical team, ensuring efficient and stable supply of high-quality products.
With an unwavering pursuit of scientific and technological innovation, we continuously invest in R&D resources and have established long-term partnerships with well-known scientific research institutions, continuously introducing new products with outstanding performance. The company strictly adheres to the ISO9001 quality, environmental, and occupational health and safety management system certification standards. Every link, from raw material procurement to product delivery, is strictly controlled to ensure that products meet international standards.
FAQ
Q: Can you send samples?
A: Yes, we are very happy to provide you with free samples to check the quality of our products.
Q: Are you a manufacturer or a trading company?
A: Our company located in Hefei, Anhui Province, with a registered capital of 52 million yuan. It is a professional manufacturer of geomembrane, geotextile, geogrid and other products. So we have the competitive price with best quality.
Q: Can you produce the product according to customers' requirements?
A: Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q: How long is the delivery time?
A: General within 3-7 days after received the deposit.
Q: How to control product quality?
A: Our factory adopts lean management,products from the beginning to the end of the production process have strict quality control. All products must be strictly tested before packing and shipping.
){kind=link}