Multi-Axial Fiberglass Geogrid for Bridge Expansion Joint Reinforcement

• Customization: Available
• After-sales Service: Installation Guidance
• Warranty: 5-10 Years
• Color: Black
• Application: Retaining Wall, Steep Slop, Dam, Road Base
• Viscose: Without Viscose
• Function: Anti-slip, Reinforcement
• Classification: Fiberglass Geogrid
• Material: Fiberglass
• Size: 50X50kN/M
• Raw Material: Glass Fiber
• Certificate: CE/ISO9001/BV
• Width: 1-6m
• Length: 50m/100m/Customer Requirement
• Performance: High Tensile Strength Longitudinal and Transverse
• Market: Europe, Africa, Asia, Middle East etc
• Samples: Free Samples
• Model: 30kN/60kN/80kN/100kN/150kN/200kN
• Transport Package: Black PE Film or Woven Bags for Outside Packag
• Specification: 12.7*12.7 / 25.4*25.4 /40*40
• Origin: China
• HS Code: 70191900
• Production Capacity: 100000 Square Meter /Day

Product Description

 

Product Description

                                           Soil Slope Walls Reinforcement High Strength fiberglass Geogrid
 Glass Fiber Geogrid is composed of a reticular structural material made of glass fiber filament with modified bitumen coating. It withstands high and low temperatures and can resist corrosion. FiberGlass geogrid is a stress relief asphalt reinforcement grid developed specifically for ashpalt overlays. Fiber Glass geogrid can not only decrease the cost of construction but also longer the service life of the pavement and road.Glass Fiber Geogrid in a pavement system can distribute traffic loading of vehicle and prevent reflective cracking due to temperature difference to extend service life of pavement.
The product has the characteristics of high strength, low elongation, high temperature resistance, high modulus, light weight, good toughness, corrosion resistance, long life and so on. In engineering fields such as slope protection, road and bridge pavement enhancement treatment, it can strengthen and reinforce the pavement, prevent pavement rutting fatigue cracks, hot-cold expansion cracks and reflection cracks below, and can disperse the bearing stress of the pavement, prolong the service life of the pavement, high Low tensile strength, low elongation, no long-term creep, good physical and chemical stability, good thermal stability, anti-fatigue cracking, high temperature rutting resistance, low temperature shrinkage crack resistance, delay and reduce reflection cracks.

Product Parameters

 

SPECIFICATION		EGA3030	EGA5050	EGA8080	EGA100100	EGA120120	EGA150150	EGA200200
Ultimate Strength (KN/M)	MD	≥30	≥50	≥80	≥100	≥120	≥150	≥200
	CMD	≥30	≥50	≥80	≥100	≥120	≥150	≥200
elongation(%)		≤4	≤4	≤4	≤4	≤4	≤4	≤4

Grid Size, mm		12.5-40.00
Width		6 Meter Maximum

Product Application

1. The old asphalt concrete pavement is reinforced to strengthen the asphalt surface layer to prevent diseases.

2. The cement concrete pavement is converted into a composite pavement to suppress reflection cracks caused by plate shrinkage.

3. Road extension and improvement project to prevent cracks caused by the junction of new and old and uneven settlement.

4. Reinforcement treatment of soft soil foundation is conducive to the consolidation of soft soil water separation, effectively inhibits settlement, uniform stress distribution, and enhances the overall strength of the roadbed.

5. The semi-rigid base of the newly built road produces shrinkage cracks, and the reinforcement is reinforced to prevent the pavement cracks caused by the reflection of the base cracks.

Company Profile

Construction Method

1. The slope shall be laid in order from top to bottom. Don't pull it too tight.
2. Tow adjacent longitudinal joints should not be in a horizontal line, should bestaggered more than 1m each other.
3. Longitudinal joints should be more than 1.50m away from the dam foot and bending foot, and should be located on the plane.
4. When the slope is laid, the direction of spreading film should be basically parallel to the slope line.
5. The construction, first of all to use small diameter sand or clay levelingbase, and then laid the geomembrane. The geomembrane should not be stretched too tight, and the part of the soil bured at both ends is corrugated. A transitional layer of about 10cm is laid on the geomembrane with sand or clay.

Shandong Geomembrane New Materials Co., Ltd. It stands out as an exceptional factory in the field of geosynthetic materials.We specialize in the entire industrial chain operation of new geosynthetic materials such as geomembranes, composite geomembranes, geotextiles, geocells, threedimensional composite drainage nets, bentonite waterproof blankets, integrating production, R&D, and sales. Equipped with advanced production equipment and a professional technical team, ensuring efficient and stable supply of high-quality products.
With an unwavering pursuit of scientific and technological innovation, we continuously invest in R&D resources and have established long-term partnerships with well-known scientific research institutions, continuously introducing new products with outstanding performance. The company strictly adheres to the ISO9001 quality, environmental, and occupational health and safety management system certification standards. Every link, from raw material procurement to product delivery, is strictly controlled to ensure that products meet international standards.
FAQ

Q: Can you send samples?
A: Yes, we are very happy to provide you with free samples to check the quality of our products.

Q: Are you a manufacturer or a trading company?
A: Our company located in Hefei, Anhui Province, with a registered capital of 52 million yuan. It is a professional manufacturer of geomembrane, geotextile, geogrid and other products. So we have the competitive price with best quality.
 

Q: Can you produce the product according to customers' requirements?
A: Sure, we are professional manufacturer, OEM and ODM are both welcome.
 

Q: How long is the delivery time?
A: General within 3-7 days after received the deposit.
 

Q: How to control product quality?
A: Our factory adopts lean management,products from the beginning to the end of the production process have strict quality control. All products must be strictly tested before packing and shipping.